Thomson DCM476 - DOCSIS 3.0 Certified Cable Modem

Description

You are bidding on used but in like a new condition in Thomson DCM476 - DOCSIS 3.0 Certified Cable Modem (see picture). With the evolution of cable standards, DOCSIS 3.0 will prove decisive for cable operators wishing to provide high bandwidth data delivery and to stay ahead of the content with game and video over IP delivery. With this new generation of High Speed Data Services Solution, Technicolor introduces up to eight (8) bonded downstream channels and four (4) bonded upstream channels, with a design backward-compatible for use as a single-channel with older networks without any service interruption. Thanks to the integrated dual split tuner solution, the operator will benefit from flexibility in channel allocation: to ease the management when the channel frequency plan is loaded or to separate data from other services such as video over IP. The new DCM476 comes in the sleek attractive design Technicolor has adopted as the new «family look».
Box include:
Thomson DCM476 cable modem
Power supply
Ethernet cable
Modem info:
Firmware: STAC.02.50
Software: a81a
Bootloader: 2.3.1
Standards / Certifications
Data: DOCSIS 3.0 certified
CMTS Interoperability: Any qualified DOCSIS CMTS
Receiver
Downstream Modulation: QAM 64/256
Downstream Frequency Range: 54-1002 MHz
Maximum Downstream Data Range: 340 Mbps (theoretical) (42.88 Mbps x 8 channels)
Capture Windows: 96 MHz capture window with integrated tuner solution
Number of Downstreams: up to 8
Input Signal Level Range: -15dBmV ~ + 15dBmV
Input Impedance: 75 Ohm
Transmitter
Upstream Modulation: QPSK and 8, 16, 32, 64 and 128 QAM
Number of Uptreams: 4
Upstream Frequency Range: 5-42 MHz
Maximum Upstream Data Range: 131 Mbps (theoretical) (32.78 Mbps x 4 channels)
Channel Bandwidth: 200, 400 and 800kHz, 1.6, 3.2 and 6.4 MHz
Output Impedance: 75 Ohm
PC Compatible
Operating Systems: Windows 2000, XP, Vista or later
Ethernet Port: 10/100/1000 Base-T
Drive: CD-ROM
Software Features
Software Downloadable: yes
Multiple Client Support: 32
Class of Services (CoS): 16 SIDs
Protocol Filtering: Ethernet & IP
SNMP Management: V2, V3
Security: BPI+
HTTP Server (CM status): yes
Local configuration: yes
Through HTTP server: yes
Interfaces / Physical
Giga Ethernet: 1 x RJ45, 10/100/1000 Base-T auto detect
RF Connector: 1 x F-Type
Button: Reset
LEDs: Power, DS, US, Online, Link
Power Supply: External, 120VAC 60Hz
Operating Temperature: 32° F to 104° F
Operating Humidity: 20% to 90% non-condensing
Storage Temperature: -4° F to 158° F
Safety: FCC Part 15
Features:
DOCSIS 3.0 certified
96 MHz integrated tuner fully compliant with DOCSIS 3.0
1 Gigabit Ethernet port
MPEG2 over IP Encapsulation solution
Reliable high-performance platform
Powerful processor and architecture
Advanced Power Control
BPI+ communications privacy to support secure data exchange between modems & cable operator’s servers
Easy to Use, Easy to Install
As all Technicolor gateways, the GEthernet port DCM476 is an easy to use, easy to install gateway.
For convenience of the end user, the easy-to-access LEDs provide a clear indication of start-up sequence and connectivity status.
Multiple integrated Web pages allow direct access to the status and settings, including privacy and security information.
Ecological Design
Technicolor, as front-runner in ecological design, offers in the DCM476 advanced features to reduce power consumption. It is designed with advanced power management to better control power consumption, thanks to the integrated tuner. The Gateway even supports a lower power mode thanks to a split tuner solution, an integrated upstream power amp and the auto power down feature on the external GEthernet interfaces. Additional power control features are supported with the ability to turn off any or all modules, to slow down or turn off processors and to turn off all external interfaces, reducing the power consumption even more.
Advanced Diagnostics
Advanced web pages to facilitate installation and troubleshooting
Easy configuration and set-up
Remote access via SNMP, Web Page
Post-installation easily managed with SNMP
Notice: Canada ISP always change their modem support listing, Please check with your LOCAL ISP before you purchase. All know by me information about this modem are on pictures or item description.
I accept PayPal. Payment must be confirmed before shipping, and contact must be made within 2 days of auction closing and payment made within 3 days, cost of shipping is .00 to United States and .00 to Canada. NO PICKUP. PLEASE DO NOT BID UNLESS YOU INTEND TO PAY . Sale is final, no exchanges, and no refunds.