PUMP DUTY FLOAT SWITCH - 20 FT NORMALLY OPEN - WIDE ANGLE SKIVE CORD END

Description

These high quality float switches are designed for pump duty loads. The float switch is as normally open or pump down (circuit is complete when the float is elevated).
The float cord is intended to be attached to a vertical pipe a band clamp, cable tie or tether clamp. As an option the float can be installed with a cable weight as the pivot point.
This float has a 120 VAC Piggyback Plug, where no junction boxes or complicated electrical connections are needed. Plug the switch into a standard 120 VAC outlet, and plug your pump into the piggyback plug.
Operation:
Normally Open (Pump Down)
Cord:
20' Flexible 16 Gauge 2 Conductor SJOOW (UL & CSA) CPE (Chlorinated Polyethylene) Jacketed
Ratings:
13 AMP @ 120 VAC
1/2 H.P. @ 120 VAC
58.8 LRA
Operating Angle:
Wide Angle
Contacts close @ 45° above horizontal
Contacts open @ 45° below horizontal
Housing:
2.625" Dia x 4.625"
Float Material:
A.B.S. (Acrylontrile Butadiene Styrene)
Operating Temperature:
Up to 82ºC/180ºF
Pump Range:
7" to 28" adjustable based upon length of cable beyond clamp / tether
Float Switch:
Mechanical (Contains no mercury) UL 508 Listed
Warranty:
1 Year