-40%

NEW PUMP PROTECTION MERRILL WATER WELL PRESSURE SWITCH SUBMERSIBLE / JET

$ 15.31

Availability: 386 in stock
  • Type: Well
  • Restocking Fee: No
  • MPN: MPSM43050
  • Application: Water Well
  • Brand: Merrill
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Country/Region of Manufacture: China
  • Power Source: Electric
  • Refund will be given as: Money Back
  • Model: MPSM43050
  • Condition: New

    Description

    NEW Merrill Pressure Switch w/ Pump Protection (Low Pressure Cut-Out)
    FREE PRIORITY MAIL SHIPPING TO ANYWHERE IN THE U.S.A
    Use:
    Submersible or Jet Pump 115v or 230v
    Model:
    MPSM43050
    Pressure Settings:
    Factory Set at 30/50
    Can be easily adjusted to 40/60, 20/40 or any other setting.
    Has separate differential adjustment to raise or lower cut out pressure without changing cut in pressure.
    Pump Protection:
    Switch will mechanically shut off power to pump if line pressure drops 10 PSI below cut-in pressure and will need reset manually.
    Lever on side needs to be raised just enough for contacts to make until line achieves set cut-in pressure then it can be released.
    This will need to be done on start-up after switch is installed and whenever the line pressure drops 10 PSI below cut-in pressure to protect the well pump motor.
    If lever is raised all the way up switch will turn off.
    Important: Air Charge in pressure tank should be set to
    2-4 PSI
    below cut-in pressure of switch to achieve maximum drawdown of tank and avoid short cycling of pump. The higher the pressure setting is set at will lower the overall drawdown capacity of the pressure tank will be. Failure to adjust the air charge properly can cause the following problems:
    Air Charge too Low: Pump will cycle frequently because the pump will come on before tank is drawn down.
    Air Charge too High: Tank will draw down completely and pressure will drop off before the pump kicks back on and in the case using this switch it will shut off the power because the switch is designed to cut off the power due to low pressure situations to protect the pump.
    If your switch is short cycling(rapidly turning on and off) it is probably due to the fact that your pressure tank is failed and is not a switch malfunction. Always check the air charge in the tank with a tire pressure gauge with the pump off and water pressure drained from the lines.
    Connection:
    1/4" FEMALE PIPE THREAD
    International Buyers - Please Note:
    Import duties, taxes, and charges are
    not included
    in the item price or shipping cost. These charges are the buyer's responsibility.
    Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.