-40%

CB Antenna Firestik Hustler Procomm Accessories Unlimited 2 3 4 Foot Free Ship

$ 12.04

Availability: 50 in stock
  • All returns accepted: Returns Accepted
  • Type: CB Antenna
  • Refund will be given as: Money Back
  • Firestick Firefly Part Numbers:: FL4 FL4-B FL3 FL3-B
  • Hustler Part Numbers:: 1C-75 1C-75-W IC-75 IC-75-W
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • Model: AUFLEX2 IC75W JBC3600 JBC1300
  • Condition: New
  • Accessories Unlimited Part Numbers:: AUFLEX2 AUFLEX2-B
  • ProComm Part Numbers:: JBC4800 JBC3600 JBC2400 JBC1300
  • Brand: Firestik Hustler Procomm Accessories Unlimited

    Description

    ACCESSORIES UNLIMITED AUFLEX2-B - 2 FOOT BLACK 3/8" X 24" SUPERFLEX CB ANTENNA WITH TUNABLE TIP
    Firestik Firefly FL4 Black 4 ft Flex Fiberglass CB Radio Antenna w/ tuneable tip
    4 Ft (122cm) 5/8 wave
    Lightweight, Easy-tune 'bare-hands tunable tip'
    Top-loaded antenna will also receive the NOAA emergency weather alert
    Rated @ 200 watts
    3/8 X 24 Standard Thread
    Firestik FL3B Antenna 3' Fire-Fly 100W CB Radio Type Black
    The ''FL'' Series antennas are the performance leader of lightweight top-loaded CB antennas. Each is approximately 40% lighter than the equivalent length Firestik II antenna. From the perspective of mount stress, the lighter materials and reduced wind drag of the ''FL'' antennas reduces stress by more than 60%. A 4-foot FireFly will easily perform on a mount that is designed for antennas 3 foot or less. At the top of every ''FL'' antenna you will find FireStik's patented tunable-tip. Besides making tuning a snap, the design broadens the antennas bandwidth and increases its power handling capabilities. All ''FL'' antennas are compatible with autos/trucks/vans/motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or they may be used in dual (co-phased) configuration on any vehicle made from any type of material. All ''FL'' antennas exceed the requirements of any CB radio new or old. These top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. Lightweight. Easy-tune 'bare-hands tunable tip'. High-performance coil design. Flexible fiberglass tube. Mount Type: 3/8 inch x 24 thread. Length: 36 Inches. Frequency Range: 26-30MHz. Frequency Type: CB Radio. Load Position: Top. Antenna Type: Fiberglass. Power Rating: 100 Watts. Mount and/or Cable Included: No. Termination: 3/8 inch x 24 thread.
    HUSTLER IC-75-W CB RADIO ANTENNA MAGNETIC BASE White 41" WHIP 1C-75-W
    4
    1" TALL
    17-7 ph STANLESS STEEL WHIP
    1/4 WAVE DESIGN
    3 1/2" MAGNET MOUNT
    HIGH IMPACT WHITE PLASTIC HOUSING
    100W POWER HANDLING
    50 Ohms IMPEDANCE
    15' WHITE COAX WITH PL-259 CONNECTORS
    EASY TO TUNE
    FREQUENCY RANGE 27 MHz
    Hustler’s  newest magnetic mount antenna
    1C-100 offers reliable tuning, solid performance and quality construction.
    A one piece plastic housing covers the coil and a powerful magnetic mount.
    Mount On Trunk, Roof, or any surface.
    Powerful Magnet
    It is 41 inches tall, and includes 15 feet  of coax.
    Black Antenna Base.
    Easy to install. Just mount where you want it and connect to the CB Radio and tune.
    ProComm JBC4800 Base Load 4 Ft. Tunable CB Antennas
    The photo shows the antenna whip much shorter than actual length.
    JBC4800 48 inch
    Base Loaded Antenna Pre-Tuned for 27 MHz
    Unique High Performance Design
    Low SWR
    Field Tunable, No Cutting – Adjust Rings for Superior Performance
    Chrome Plated 3/8″ x 24 Threaded Base
    Stainless Steel Whip
    These antennas have a set of locking rings.
    These antennas need to be tuned to your vehicle and radio.
    If the SWR is high on the low channel, make the antenna slightly longer.
    If the SWR is high on the upper channel, make the antenna shorter.
    Unlock the locking rings by winding in the opposite direction.
    If you need to lengthen the antenna, loosen the top ring and move up one turn, then move the bottom ring
    up and lock.If the antenna needs to be shortened, do the opposite.
    ProComm JBC3600 Base Load 3 Ft. Tunable CB Antennas
    Photo shows whip shorter than actual length of 3 Ft.
    JBC3600 36 inch
    Base Loaded Antenna Pre-Tuned for 27 MHz
    Unique High Performance Design
    Low SWR
    Field Tunable, No Cutting – Adjust Rings for Superior Performance
    Chrome Plated 3/8″ x 24 Threaded Base
    Stainless Steel Whip
    These antennas have a set of locking rings.
    These antennas need to be tuned to your vehicle and radio.
    If the SWR is high on the low channel, make the antenna slightly longer.
    If the SWR is high on the upper channel, make the antenna shorter.
    Unlock the locking rings by winding in the opposite direction.
    If you need to lengthen the antenna, loosen the top ring and move up one turn, then move the bottom ring
    up and lock.If the antenna needs to be shortened, do the opposite.
    ProComm JBC2400 Base Load 2 Ft. Tunable CB Antennas
    JBC2400 24 inch
    Base Loaded Antenna Pre-Tuned for 27 MHz
    Unique High Performance Design
    Low SWR
    Field Tunable, No Cutting – Adjust Rings for Superior Performance
    Chrome Plated 3/8″ x 24 Threaded Base
    Stainless Steel Whip
    These antennas have a set of locking rings.  These antennas need to be tuned to your vehicle and radio.
    If the SWR is high on the low channel, make the antenna slightly longer.
    If the SWR is high on the upper channel, make the antenna shorter.
    Unlock the locking rings by winding in the opposite direction.
    If you need to lengthen the antenna, loosen the top ring and move up one turn, then move the bottom ring
    up and lock.If the antenna needs to be shortened, do the opposite.
    PROCOMM JBC1300 36" TALL HALF BREED BLACK CB ANTENNA WITH STAINLESS STEEL WHIP
    Half Breed Antenna
    5/16″ Durable Fiberglass Base
    18 Gauge Copper Wire
    17-7 .100 Diameter Stainless Steel Whip
    Factory Tuned and Field Adjustable by Adjusting Whip
    Base Loaded – 1000 Watt Rated
    Freqency range is 26-30 MHz
    Bottom loaded with a Stainless Steel Whip
    Fits 3/8″ x 24 thread mounts