Badge Patch Warthog Boar Biker Fusible Apply Patch DIY Embroidered

Description

Badge Patch Warthog Boar Biker Fusible Apply Patch DIY Embroidered
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Designation
:
patch / patch / badge / emblem / transfer / crest
/
badge
Model
:
Warthog / Standard Size
Composition
:
Polyester
Manufacturing method
:
Embroidered
Dimensions
:
10 x 9cm
Application
:
Fusible (to be flocked with an iron)
manual:
1.
Slightly wet the back (thin plastic layer) of the patch.
2. Place the reverse side on the fabric to be flocked.
3. Set the iron to cotton temperature.
4. Cover the crest with a piece of fabric.
5. Apply the iron for 10-15 seconds.
6. Turn garment inside out and apply iron to flocked surface until dry
OR use a textile press, it's even better!
Designation: patch / patch / badge / emblem / transfer / crest / badge Model:  Warthog / Standard Size Composition: Polyester    Manufacturing method: Embroidered  Dimensions: 10 x 9cm Application: Fusible (to be flocked with an iron) manual:  1. Slightly wet the back (thin plastic layer) of the patch. 2. Place the reverse side on the fabric to be flocked. 3. Set the iron to cotton temperature. 4. Cover the crest with a piece of fabric. 5. Apply the iron for 10-15 seconds. 6. Turn garment inside out and apply iron to flocked surface until dry OR use a textile press, it's even better!
Garantie fabricant
Sans garantie
Couleur principale
Marron
Pays de fabrication
Thaïlande
Couleur
Multicolore
EAN
3701038740254
Couleur exacte
Multicolore
Marque
- Sans marque/Générique -
Unité de mesure
Unité
Thème
Sanglier
Objet modifié
Non
Offre groupée personnalisée
Non
Quantité unitaire
1